Blast Chambers

Many companies purchase blast chambers to offer them the control and cost advantages of bringing blast cleaning in-house.

Our blast chambers can be supplied from our range of standard modular sized fixed installation rooms or custom built to your requirements.

In all cases a site survey and consultation is required first to exactly determine the customers requirements and provide a quotation for the most appropriate system.

Specification required will include variables such as :

• Optimum Location and Size - e.g. internal, external, containerised.
  
  
• Number of operators and operator / work-piece access requirements
  
  
• Frequency of use
  
  
• Grit Recovery system - ensures economic running costs by re-use of the abrasive. Types are sweep-in hopper and/or bucket elevator, vacuum system, under floor screw, air wash or cyclone.
  
  
• Dust extraction - air powered or electric vacuum
  
  
• Abrasive separator - to removes contamination from recycled abrasive
  
  
• Custom requirements

ENVIRACLEAN Dust Extraction

The demand for control over the volumes of dust generated by abrasive blasting requires a purpose built solution.

Coupled with the need for improved envonmental controls, operator health and safety requirements,  is the higher productivity achieved by having a dust free working area.

Although dust collectors are a common feature in many factories, standard site collection units are unsuitable for the rigors of site use. Simply beefing up a standard collector will not do.

The extraction rates needed determines the motor, air speed, and filtration area.

Both portable or stationery units can be specified depending on your requirements.

Fitted with large surface area filter cartridges, which periodically self-clean by means of a reverse air pulse. Excess dust falls into collection hoppers.

A short pulse of air causes the dust accumulated on the cartridges to fall into collection bins below at predetermined intervals keeping the cartridges clean whilst the collector is in operation.

MUNKEBO Site Recovery Systems

Recovered abrasive in many cases can be cleaned (when dry) and reused by a Munkebo Unit. The purpose of a recycling system is to remove fines and debris from the abrasive and leave you with good clean abrasive minimising dust and maximising productivity. Recycling systems can be installed in field blasting applications or existing blast sheds.

Recovery systems can also be utilised to remove used expendable media quickly and efficiently from storage tanks and others difficult to access areas.

back to top